-
- +86-130 5919 0518
- 008613059190518
- sales@super-steels.com
اسم المنتج: أنابيب الفولاذ المقاوم للصدأ المصنوعة من سبائك النيكل والنحاس والنيكل ، أنابيب سبائك النيكل والنحاس ، أنابيب النحاس غير الملحومة
القطر الخارجي: 8-2500 ، (3/ 8 "-100")
سمك الجدار: 0.3-150 (من)
الطول: 2000 ، و 2438 ، و 3000 ، و 5800 ، و 6000 ، و 12000 ، وما إلى ذلك
المعيار: ASTM B68/B88/B75/B111 ، JIS H3300 ، BS2871 ، EN1057 ، EN12449 ، إلخ
السطح: با ، 2b ، No.1 ، No.4 ، 4k ، Hl ، 8k
شهادة: ISO ، SGS ، BV
تقنية: المدرفلة على البارد المدرفلة على الساخن
درجة (Astm Uns):N04400 、 N05500 、 N4 、 N6 、 254smo 、 17-4ph 、 2507 、 904l 、 304 、 304l 、 320 、 316 、 316l 、 347h 、 31603 、 s254 、 360 s 、 904l 、 s32ti 、 2507 s31635 ، s31251 ، N08926 ، 2205 ، S32205 ، S31008 ، S30908 ، S32750 ، S32760 ، 630 إلخ
درجة (En): 1.4301 ، 1.4304 ، 1.4541 ، 1.4401 ، 1.4404 ، 1.4571 ، 1.4438 ، 1.4539 ، 1.4547 ، 1.4529 ، 1.4410 ، 1.4501 ، 1.4462 ، 1.4845 ، 1.4542 ، إلخ
اسم المنتج: أنابيب الفولاذ المقاوم للصدأ من النيكل وسبائك النحاس والنيكل
القطر الخارجي: 8-2500 ، (3/ 8 "-100")
السماكة: 0.3-150 ، (من)
الطول: 2000 ، و 2438 ، و 3000 ، و 5800 ، و 6000 ، و 12000 ، وما إلى ذلك
معيار: Astm ، Aisi ، Jis ، Gb ، Din ، En
السطح: با ، 2b ، No.1 ، No.4 ، 4k ، Hl ، 8k
شهادة: Iso ، Sgs ، Bv
تقنية: المدرفلة على البارد المدرفلة على الساخن
درجة (Astm Uns):N04400 、 N05500 、 N4 、 N6 、 254smo 、 17-4ph 、 2507 、 904l 、 304 、 304l 、 320 、 316 、 316l 、 347h 、 31603 、 s254 、 360 s 、 904l 、 s32ti 、 2507 s31635 ، s31251 ، N08926 ، 2205 ، S32205 ، S31008 ، S30908 ، S32750 ، S32760 ، 630 إلخ
درجة (En): 1.4301 ، 1.4304 ، 1.4541 ، 1.4401 ، 1.4404 ، 1.4571 ، 1.4438 ، 1.4539 ، 1.4547 ، 1.4529 ، 1.4410 ، 1.4501 ، 1.4462 ، 1.4845 ، 1.4542 ، إلخ
سبائك النحاس والنيكل
أنابيب النحاس والنيكل غير الملحومة 70-30
أنابيب غير ملحومة من النيكل cubro 70-30 ، أنابيب غير ملحومة من Uns C71500 ، أنابيب غير ملحومة من Din 2.0882
أنابيب غير ملحومة من النيكل والنحاس 70-30
Cu-Ni 70-30 أنبوب غير ملحوم ، Cuni Uns C71500 أنبوب غير ملحوم ، Din 2.0882 أنابيب غير ملحومة
أنابيب ملحومة من النيكل والنحاس 70-30
مورد أنابيب ملحومة من النيكل cubro 70-30 ، أنابيب ملحومة Uns C71500 ، أنابيب ملحومة Cu-Ni Din 2.0882
أنابيب ملحومة من النيكل والنحاس 70-30
أنبوب ملحوم 70-30 Cuni ، أنبوب ملحوم Uns C71500 ، أنبوب ملحوم Asme Sb111 من النيكل والنحاس 70-30
أنابيب النحاس والنيكل 70-30 Erw
مورد أنابيب النيكل cubro 70-30 Erw ، سبائك Cuni Uns C71500 أنابيب Erw ، Cu-Ni Din 2.0882 Erw Pipe
أنابيب النيكل والنحاس 70-30 Erw
Uns C71500 أنبوب Erw ، Din 2.0882 أنابيب Erw ، Astm B111 cubro نيكل 70-30 أنابيب Erw ، Cu-Ni 70-30 أنابيب Erw
أنابيب النيكل cubro 90-10 للمبادلات الحرارية والمكثفات
أنابيب النيكل cubro 90-10 لصناعة السيارات أنابيب النحاس والنيكل 90-10
أنابيب غير ملحومة من النيكل cubro 90-10 ، أنابيب غير ملحومة من Uns C70600 ، أنابيب Din 2.0872 غير ملحومة
أنابيب النحاس والنيكل 90-10 غير الملحومة
Cu-Ni 90-10 أنبوب غير ملحوم ، Cuni Uns C70600 أنبوب غير ملحوم ، Din 2.0872 أنابيب غير ملحومة
أنابيب ملحومة من النيكل والنحاس 90-10
مورد أنابيب ملحومة من النيكل 90-10 ، أنابيب ملحومة Uns C70600 ، أنابيب ملحومة Cu-Ni Din 2.0872
النيكل والنحاس 90-10 أنابيب ملحومة
90-10 أنبوب ملحوم Cuni ، أنبوب ملحوم Uns C70600 ، أنبوب ملحوم Asme Sb111 من النحاس والنيكل 90-10
أنابيب النحاس والنيكل 90\ 10 Erw
مورد أنابيب النيكل 90-10 Erw من cubro ، أنابيب Cuni السبائك Uns C70600 Erw ، أنابيب Cu-Ni Din 2.0872 Erw
أنابيب النحاس والنيكل 90-10 Erw
Uns C70600 أنبوب Erw ، Din 2.0872 أنبوب Erw ، Astm B111 Cupro نيكل 90-10 أنابيب Erw ، Cu-Ni 90-10 أنابيب Erw
الانتقال إلى أنابيب النحاس والنيكل
وقد ثبت أن النحاس منذ الأيام الأولى يتمتع بالعديد من السمات الجيدة. كان من السهل الانحناء وكان
مقاومة عالية جدا للتآكل ، ولكن كان هناك قلق بشأن انخفاض قوة التآكل والتعب. عندما cubro
تم تقديم النيكل ، وعرض مقاومة التآكل مماثلة للنحاس ، وقوة عامة أعلى وأفضل
قوة التعب.
خصائص أنابيب فرامل النحاس والنيكل
تحتوي سبيكة النحاس والنيكل المستخدمة لأنابيب الفرامل عادة على 10 ٪ نيكل ، مع الحديد والمنجستات
إضافات بنسبة 1.4 ٪ و 0.8 ٪ على التوالي. المنتج يتوافق مع astm b466 (المجتمع الأمريكية للاختبار
والمواد) ، التي تحدد الأبعاد وقوة الشد وقوة الإنتاجية. القابلية للتشكيل والداخلية
النظافة تتوافق مع المواصفات sae j527 و astm a254 و smmt c5b (مجتمع المحرك
المصنعين والتجار). أيضا ، سبيكة يلبي متطلبات احتواء الضغط ، تلفيق
ومقاومة التآكل لـ iso 4038 (منظمة المعايير الدولية) و sae j1047.
Cupronickel أو النحاس والنيكل أو "cupernickel" عبارة عن سبيكة من النحاس تحتوي على النيكل وتعزيزه
العناصر ، مثل الحديد والمنجنز. Cupronickel مقاوم للغاية للتآكل في مياه البحر ، لأنه
يتم تعديل إمكانات القطب لتكون محايدة فيما يتعلق بمياه البحر. بسبب هذا ، يتم استخدامه للأنابيب والحرارة
المبادلات والمكثفات في أنظمة مياه البحر ، وكذلك الأجهزة البحرية ، وأحيانًا المراوح ،
أعمدة كرنك وقوارب صيد وقوارب عمل أخرى.
Cupronickel الأخرى المسجلة باسم الأسماء التجارية هي alpaka أو alpacca (علامة تجارية مسجلة) ، و minargentan ، و
اسم المصطلح الفرنسي cuivre blarch. أحيانا ، يشار إلى cupronickel أيضا باسم "الفضة الفندق" ، plata alemana
(إسبانية لـ "الفضة الألمانية") ، "الفضة الألمانية" و "الفضة الصينية".
يُطلق عليها أحيانًا cubro-nickels ، توجد مجموعة من سبائك النيكل والنحاس المختلفة التي تمتلك أنواع مختلفة
الخصائص وبالتالي مناسبة لمجموعة من التطبيقات المختلفة. بعض سبائك النحاس والنيكل المعروفة
تشمل:
النحاس مع النيكل 10 ٪
النحاس مع النيكل 30 ٪
النحاس مع 25 ٪ النيكل مع 0.05-0.4 ٪ من النيكل
النحاس مع النيكل 45 ٪ (المعروف أيضا باسم كونستانتان)
Chemical Composition of Copper Nickel 70/30 Pipes & Tubes
Grade |
Cu |
Mn |
Pb |
Ni |
Fe |
Zn |
Cu-Ni 70-30 |
65.0 min |
1 max |
.05 max |
29-33 |
0.4-1.0 |
1 max |
Mechanical Properties of Cu-Ni 70/30 Pipes and Tubing
Properties |
Metric |
Imperial |
Tensile strength, ultimate |
372-517 MPa |
54000-75000 psi |
Tensile strength, yield (depending on temper) |
88.0-483 MPa |
12800-70100 psi |
Elongation at break (in 381 mm) |
45.0% |
45.0% |
Charpy impact |
107 J |
78.9 ft-lb |
Machinability (UNS C36000 (free-cutting brass) = 100%) |
20% |
20% |
Shear modulus |
57.0 GPa |
8270 ksi |
Poisson's ratio |
0.34 |
0.34 |
Elastic modulus |
150 GPa |
21800 ksi |
Physical Properties of Cupro Nickel 70/30 Pipes & Tubes
Properties |
Metric |
Imperial |
Density |
8.94 g/cm3 |
0.323 lb/in3 |
Melting point |
2140°F |
1171°C |
Chemical Composition of Copper Nickel 90/10 Pipes & Tubes
Grade |
Cu |
Mn |
Pb |
Ni |
Fe |
Zn |
Cu-Ni 90-10 |
88.6 min |
1.0 max |
.05 max |
9-11 max |
1.8 max |
1 max |
Mechanical Properties of Cu-Ni 90/10 Pipes and Tubing
Properties |
Metric |
Imperial |
Tensile strength, ultimate |
303-414 MPa |
43900-60000 psi |
Tensile strength, yield (depending on temper) |
110-393 MPa |
16000-57000 psi |
Elongation at break (in 254 mm) |
42.00% |
42.00% |
Machinability (UNS C36000 (free-cutting brass) = 100%) |
20% |
20% |
Shear modulus |
52.0 GPa |
7540 ksi |
Poisson's ratio |
0.34 |
0.34 |
Elastic modulus |
140 GPa |
20300 ksi |
Physical Properties of Cupro Nickel 90/10 Pipes & Tubes
Properties |
Metric |
Imperial |
Density |
8.94 g/cm3 |
0.323 lb/in3 |
All copper nickel alloys consist of only one phase as the copper nickel binary system exhibits complete solid solubility
Applications of Copper Nickel alloys:
Sea Water Condensor Systems And Desalination Plants
Due to the good resistance to sea water corrosion, the copper nickel alloy Copper 90/10 and copper nickel alloy Copper 70/30 are employed for sea water condenser systems and in desalination plants, as well as pipe work in chemical plants.
Automotive Applications
Due to the fact that the copper nickel alloy Copper 90/10 requires no surface protection and hence gives extra safety, this copper nickel alloy is being increasingly employed for brake and hydraulic suspension systems and cooling systems in cars and commercial vehicles.
Marine Applications
The good resistance to biofouling and sea water corrosion resistance of the copper nickel alloys, Copper 90/10 and Copper 70/30 alloys have lead to its use in applications such as cladding for ships' hulls, legs of oil rig platforms and sea water intake screens.
Coins
The copper nickel alloys composed of copper with 25% nickel with 0.05-0.4% manganese is commonly used for the manufacture of coins, medals and other semi valuable applications.
Resistance Wire
Due to the very low temperature co-efficient of electrical resistivity, the copper nickel alloys composed of copper with 45% nickel alloy is used for resistance wire in high precision resistors. This property of copper nickel alloys allows the resistor to operate at almost exactly the same resistance regardless of temperature.
Thermocouples
The copper nickel alloys composed of copper-45% nickel alloy is also used for thermocouples as it develops a high and uniform EMF when coupled with other metals such as copper and iron.
Other
Copper nickel alloys are also used in cooling circuits, ammunition, sea water corrosion-resistant assemblies, condenser tubes. Other Applications"
Desalination units
Property Table of Copper Nickel Alloys
lammability |
5 |
Fresh Water |
5 |
Organic Solvents |
5 |
Oxidation at 500C |
3 |
Sea Water |
5 |
Strong Acid |
2 |
Strong Alkalis |
5 |
UV |
5 |
Wear |
5 |
Weak Acid |
4 |
Weak Alkalis |
5 |
الانتقال إلى أنابيب النحاس والنيكل
وقد ثبت أن النحاس منذ الأيام الأولى يتمتع بالعديد من السمات الجيدة. كان من السهل الانحناء وكان
مقاومة عالية جدا للتآكل ، ولكن كان هناك قلق بشأن انخفاض قوة التآكل والتعب. عندما cubro
تم تقديم النيكل ، وعرض مقاومة التآكل مماثلة للنحاس ، وقوة عامة أعلى وأفضل
قوة التعب.
خصائص أنابيب فرامل النحاس والنيكل
تحتوي سبيكة النحاس والنيكل المستخدمة لأنابيب الفرامل عادة على 10 ٪ نيكل ، مع الحديد والمنجستات
إضافات بنسبة 1.4 ٪ و 0.8 ٪ على التوالي. المنتج يتوافق مع astm b466 (المجتمع الأمريكية للاختبار
والمواد) ، التي تحدد الأبعاد وقوة الشد وقوة الإنتاجية. القابلية للتشكيل والداخلية
النظافة تتوافق مع المواصفات sae j527 و astm a254 و smmt c5b (مجتمع المحرك
المصنعين والتجار). أيضا ، سبيكة يلبي متطلبات احتواء الضغط ، تلفيق
ومقاومة التآكل لـ iso 4038 (منظمة المعايير الدولية) و sae j1047.
Cupronickel أو النحاس والنيكل أو "cupernickel" عبارة عن سبيكة من النحاس تحتوي على النيكل وتعزيزه
العناصر ، مثل الحديد والمنجنز. Cupronickel مقاوم للغاية للتآكل في مياه البحر ، لأنه
يتم تعديل إمكانات القطب لتكون محايدة فيما يتعلق بمياه البحر. بسبب هذا ، يتم استخدامه للأنابيب والحرارة
المبادلات والمكثفات في أنظمة مياه البحر ، وكذلك الأجهزة البحرية ، وأحيانًا المراوح ،
أعمدة كرنك وقوارب صيد وقوارب عمل أخرى.
Cupronickel الأخرى المسجلة باسم الأسماء التجارية هي alpaka أو alpacca (علامة تجارية مسجلة) ، و minargentan ، و
اسم المصطلح الفرنسي cuivre blarch. أحيانا ، يشار إلى cupronickel أيضا باسم "الفضة الفندق" ، plata alemana
(إسبانية لـ "الفضة الألمانية") ، "الفضة الألمانية" و "الفضة الصينية".
يُطلق عليها أحيانًا cubro-nickels ، توجد مجموعة من سبائك النيكل والنحاس المختلفة التي تمتلك أنواع مختلفة
الخصائص وبالتالي مناسبة لمجموعة من التطبيقات المختلفة. بعض سبائك النحاس والنيكل المعروفة
تشمل:
النحاس مع النيكل 10 ٪
النحاس مع النيكل 30 ٪
النحاس مع 25 ٪ النيكل مع 0.05-0.4 ٪ من النيكل
النحاس مع النيكل 45 ٪ (المعروف أيضا باسم كونستانتان)
Chemical Composition of Copper Nickel 70/30 Pipes & Tubes
Grade |
Cu |
Mn |
Pb |
Ni |
Fe |
Zn |
Cu-Ni 70-30 |
65.0 min |
1 max |
.05 max |
29-33 |
0.4-1.0 |
1 max |
Mechanical Properties of Cu-Ni 70/30 Pipes and Tubing
Properties |
Metric |
Imperial |
Tensile strength, ultimate |
372-517 MPa |
54000-75000 psi |
Tensile strength, yield (depending on temper) |
88.0-483 MPa |
12800-70100 psi |
Elongation at break (in 381 mm) |
45.0% |
45.0% |
Charpy impact |
107 J |
78.9 ft-lb |
Machinability (UNS C36000 (free-cutting brass) = 100%) |
20% |
20% |
Shear modulus |
57.0 GPa |
8270 ksi |
Poisson's ratio |
0.34 |
0.34 |
Elastic modulus |
150 GPa |
21800 ksi |
Physical Properties of Cupro Nickel 70/30 Pipes & Tubes
Properties |
Metric |
Imperial |
Density |
8.94 g/cm3 |
0.323 lb/in3 |
Melting point |
2140°F |
1171°C |
Chemical Composition of Copper Nickel 90/10 Pipes & Tubes
Grade |
Cu |
Mn |
Pb |
Ni |
Fe |
Zn |
Cu-Ni 90-10 |
88.6 min |
1.0 max |
.05 max |
9-11 max |
1.8 max |
1 max |
Mechanical Properties of Cu-Ni 90/10 Pipes and Tubing
Properties |
Metric |
Imperial |
Tensile strength, ultimate |
303-414 MPa |
43900-60000 psi |
Tensile strength, yield (depending on temper) |
110-393 MPa |
16000-57000 psi |
Elongation at break (in 254 mm) |
42.00% |
42.00% |
Machinability (UNS C36000 (free-cutting brass) = 100%) |
20% |
20% |
Shear modulus |
52.0 GPa |
7540 ksi |
Poisson's ratio |
0.34 |
0.34 |
Elastic modulus |
140 GPa |
20300 ksi |
Physical Properties of Cupro Nickel 90/10 Pipes & Tubes
Properties |
Metric |
Imperial |
Density |
8.94 g/cm3 |
0.323 lb/in3 |
All copper nickel alloys consist of only one phase as the copper nickel binary system exhibits complete solid solubility
Applications of Copper Nickel alloys:
Sea Water Condensor Systems And Desalination Plants
Due to the good resistance to sea water corrosion, the copper nickel alloy Copper 90/10 and copper nickel alloy Copper 70/30 are employed for sea water condenser systems and in desalination plants, as well as pipe work in chemical plants.
Automotive Applications
Due to the fact that the copper nickel alloy Copper 90/10 requires no surface protection and hence gives extra safety, this copper nickel alloy is being increasingly employed for brake and hydraulic suspension systems and cooling systems in cars and commercial vehicles.
Marine Applications
The good resistance to biofouling and sea water corrosion resistance of the copper nickel alloys, Copper 90/10 and Copper 70/30 alloys have lead to its use in applications such as cladding for ships' hulls, legs of oil rig platforms and sea water intake screens.
Coins
The copper nickel alloys composed of copper with 25% nickel with 0.05-0.4% manganese is commonly used for the manufacture of coins, medals and other semi valuable applications.
Resistance Wire
Due to the very low temperature co-efficient of electrical resistivity, the copper nickel alloys composed of copper with 45% nickel alloy is used for resistance wire in high precision resistors. This property of copper nickel alloys allows the resistor to operate at almost exactly the same resistance regardless of temperature.
Thermocouples
The copper nickel alloys composed of copper-45% nickel alloy is also used for thermocouples as it develops a high and uniform EMF when coupled with other metals such as copper and iron.
Other
Copper nickel alloys are also used in cooling circuits, ammunition, sea water corrosion-resistant assemblies, condenser tubes. Other Applications"
Desalination units
Property Table of Copper Nickel Alloys
lammability |
5 |
Fresh Water |
5 |
Organic Solvents |
5 |
Oxidation at 500C |
3 |
Sea Water |
5 |
Strong Acid |
2 |
Strong Alkalis |
5 |
UV |
5 |
Wear |
5 |
Weak Acid |
4 |
Weak Alkalis |
5 |