We Super Steel Manufacturing Co.,Ltd(SMC) are amongst the top manufacturers and suppliers for the seamless steel pipe, welded steel pipe, OCTG products and fittings from China. We have been manufacturing and supplying these products to the industry since 1993, and received repeat orders and appreciation from our valued customers.
High quality piping products from approved manufacturers.
In order to continuously improve our offerings to our clients, we have consistently improved and upgraded our manufacturing facility and can hence offer material with stringent requirements.
Over the years, Super Steel Manufacturing Co.,Ltd(SMC) has developed an enviable reputation for project management for the Oil & Gas, Construction, Power Energy, Marine & Offshore, Water Treatment, Exploration & Drilling Services, Pipeline & Petrochemical and other heavy industries.
The many years of experience that we have means that there is always someone who has the ability to carry a project forward.
Always up to date. In this column you can find the steel pipe related articles, including industry trends, product standards and materials, and some technical guidelines.
Product Name: Steel Sheet Pile,Interlocking Sheet Pile
Type: Z Type, U Type, Cold Formed, Hot Rolled
Standard: JIS A 5523 : 2012,JIS A 5528 : 2012,BS EN 10248-1 : 1996,BS EN 10248-2 : 1996,ASTM A572M/A572-12,ASTM A6/A6M-12
Applications: Levee Strengthening, Retaining Walls, Breakwaters, Bulkheads, Environmental Barrier Walls, Bridge Abutments, Underground Parking Garages
Steel sheet piles are sections of sheet materials with interlocking edges that are driven into the ground to provide earth retention and excavation support. Sheet piles are commonly used for retaining walls, land reclamation, underground structures such as car parks and basements, in marine locations for riverbank protection, seawalls, cofferdams, and so on.
For most engineering projects, installing sheet piles is typically used for scaffolding or temporary excavation protection applications. These include basement and tunnel construction.
Product Name: Steel Sheet Pile,Interlocking Sheet Pile
Type: Z Type, U Type, Cold Formed, Hot Rolled
Standard: JIS A 5523 : 2012,JIS A 5528 : 2012,BS EN 10248-1 : 1996,BS EN 10248-2 : 1996,ASTM A572M/A572-12,ASTM A6/A6M-12
Applications: Levee Strengthening, Retaining Walls, Breakwaters, Bulkheads, Environmental Barrier Walls, Bridge Abutments, Underground Parking Garages
Features of Steel Sheet Pile
Wide Selection of Shapes and Types
Sheet pile is available in a wide range of section modulus per meter of pile wall, ranging from 874 to 21,846 cm³/m. This allows selection of the most economical type of sheet pile to meet the design requirements and the intended construction method.
Superb Drivability and Watertightness
The clearance between the two threaded interlocks is moderate enough to ensure both excellent drivability and reliable watertightness.
Types of Steel Sheet Piles
Z Type Sheet Piles
U Type Sheet Piles
Cold Formed Sheet Piles
Hot Rolled Sheet Piles
Advantages of Steel Pile Sheets
- A sustainable option as made of recycled steel and the piles can often be reused
- Available in numerous combinations of size and weight
- Immediate barrier to prevent soil loss and sloughing during excavation
- Permanent sheet piles are designed to provide long service life
Applications of Sheet Pile Sections
- Levee Strengthening
- Retaining Walls
- Breakwaters
- Bulkheads
- Environmental Barrier Walls
- Bridge Abutments
- Underground Parking Garages
APPLICABLE STANDARDS
Grades of steels
CHEMICAL COMPOSITION
|
Notation |
C |
Si |
Mn |
P |
S |
Cu |
|
SY 295 |
- |
- |
- |
0.04 max. |
0.04 max. |
0.25 min. |
|
SY390 |
- |
- |
- |
0.04 max. |
0.04 max. |
0.25 min. |
MECHANICAL PROPERTIES
|
Notation |
Tensile Strength N/mm2 |
Yield Point N/mm2 |
Elongation % |
|
SY 295 |
490 min. |
295 min. |
17 min. |
|
SY390 |
540 min. |
390 min. |
15 min. |
DIMENSIONAL TOLERANCES
|
Description |
Tolerance |
|
|
Width |
+ 10mm - 5mm
|
|
|
Height |
± 4% |
|
|
Thickness |
Under 10mm |
± 1.0mm |
|
10mm & over to 16mm, excl |
± 1.2mm |
|
|
16mm & over |
± 1.5mm |
|
JIS A 5523 : 2012
JIS A 5528 : 2012
BS EN 10248-1 : 1996
BS EN 10248-2 : 1996
ASTM A572M/A572-12
ASTM A6/A6M-12
APPLICABLE STANDARDS
Grades of steels
CHEMICAL COMPOSITION
|
Notation |
C |
Si |
Mn |
P |
S |
Cu |
|
SY 295 |
- |
- |
- |
0.04 max. |
0.04 max. |
0.25 min. |
|
SY390 |
- |
- |
- |
0.04 max. |
0.04 max. |
0.25 min. |
MECHANICAL PROPERTIES
|
Notation |
Tensile Strength N/mm2 |
Yield Point N/mm2 |
Elongation % |
|
SY 295 |
490 min. |
295 min. |
17 min. |
|
SY390 |
540 min. |
390 min. |
15 min. |
DIMENSIONAL TOLERANCES
|
Description |
Tolerance |
|
|
Width |
+ 10mm - 5mm
|
|
|
Height |
± 4% |
|
|
Thickness |
Under 10mm |
± 1.0mm |
|
10mm & over to 16mm, excl |
± 1.2mm |
|
|
16mm & over |
± 1.5mm |
|
JIS A 5523 : 2012
JIS A 5528 : 2012
BS EN 10248-1 : 1996
BS EN 10248-2 : 1996
ASTM A572M/A572-12
ASTM A6/A6M-12
English
Español
Français
بالعربية
